Steps
1 Lift the retention clips at the edge of the bezel to release the bezel from the system.
2 Unhook the bezel tabs and pull the bezel away from the system.
Figure 11. Removing the front bezel
Next step
1 Replace the front bezel.
Installing the front bezel
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure that is listed in Before working inside your system.
Steps
1 Place the bezel tabs into the bezel slots in the system.
2 Press the bezel into the system until the retention clips lock into place.
Installing and removing system components
43
To Next Page
Loading...
