Steps
1 Disconnect the control panel cable from the control panel.
1
CAUTION: Do not use excessive force when removing the control panel cables as it can damage the connectors.
2 Using the Phillips #2 screwdriver, remove the screws that secure the control panel to the control panel cage.
3 Slide the control panel out of the control panel cage.
Figure 55. Removing the control panel
Next step
1 Replace the control panel.
Installing the control panel
Prerequisites
1 Follow the safety guidelines listed in Safety instructions
2 Follow the procedure that is listed in Before working inside your system.
Steps
1 Align and insert the control panel into the control panel cage.
2 Using the Phillips #2 screwdriver, secure the control panel to the cage with screws.
Installing and removing system components
85
To Next Page
Loading...
