Figure 56. Installing the control panel
Next steps
1 Connect the control panel cable to the control panel.
2 Install the control panel cage.
3 Follow the procedure that is listed in After working inside your system.
Installing the control panel cage
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure that is listed in Before working inside your system.
Steps
1 Align and insert the control panel cage into the control panel cage slot in the system.
2 Secure the control panel cage to the system with screws.
3 Route the control panel cable and control panel USB cable through the system clip.
4 Connect the control panel cable and control panel USB cable to the system board.
86
Installing and removing system components
To Next Page
Loading...
