Dell EMC PowerEdge T140 - Installing a Pcie Expansion Card

Figure 29. Installing the ller bracket
Next step
1 Replace the expansion card.
Installing a PCIe expansion card
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure that is listed in Before working inside your system.
Steps
1 Unpack the expansion card and prepare it for installation.
NOTE
: For instructions, see the documentation accompanying the card.
2 Press and push out the expansion card release latch to open it.
3 Remove the expansion card or ller bracket from the expansion card holder.
NOTE
: Store this bracket for future use. Filler brackets must be installed in empty expansion-card slots to maintain FCC
certication of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airow
inside the system.
Installing and removing system components 61