Figure 30. Removing the ller bracket
4 Holding the card by its edges, position the card so that the card aligns with the expansion card connector.
5 Insert the card rmly into the expansion card connector until the card is fully seated.
6 Close the expansion card latch by pushing the latch up until the latch snaps into place.
Figure 31. Installing a PCIe expansion card
Next steps
1 Connect the cables to the expansion card.
2 Install any device drivers required for the card as described in the documentation for the card.
3 Follow the procedure that is listed in After working inside your system.
62
Installing and removing system components
To Next Page
Loading...
