Figure 58. Installing the optical drive cage or tape drive
Next steps
1 If removed, install the front bezel.
2 Follow the procedure listed in After working inside your system.
Removing the slim optical drive
The procedure to remove the slim optical drive blank is similar to removing the slim optical drive.
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
3 Remove the optical drive cage.
NOTE
: The procedure to remove the optical drive cage is identical to removing the optical or tape drive blank.
Steps
1 Locate the touch point for the slim optical drive lock on the cage.
2 Press the lock and push the slim optical drive out of the cage.
Installing and removing system components
105
To Next Page
Loading...
