Figure 61. Removing the NVDIMM-N battery
Next step
1 Install the NVDIMM-N battery.
Installing the NVDIMM-N battery
Prerequisite
CAUTION
: To avoid damage to the battery connector, you must rmly support the connector while installing or removing a
battery.
Follow the safety guidelines listed in Safety instructions.
Steps
1 Install the NVDIMM-N battery into the battery cage
2 Using the Phillips #2 screwdriver, tighten the screw to secure the NVDIMM-N battery.
3 Connect the cables to the NVDIMM-N battery.
108
Installing and removing system components
To Next Page
Loading...
