Figure 49. Removing the right external fan
Next step
1 Installing the right external fan.
Installing the right external fan
Prerequisite
NOTE
: The procedure to install the left external fan is similar to installing the right rear fan.
Follow the safety guidelines listed in Safety instructions.
Steps
1 Guiding the fan cable through the cable vent, install the external fan over the PCIe slots.
2 Using the Phillips #2 screwdriver, secure the fan in place.
3 Connect the fan cable to the connected on the system board.
Figure 50. Install the right external fan
Next steps
1 Install the air shroud.
Installing and removing system components
97
To Next Page
Loading...
