Replacing the coin-cell battery
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1. Adhere the coin-cell battery to the palm-rest assembly.
2. Connect the coin-cell battery cable to the system board.
Post-requisites
1. Replace the
computer base.
2. Replace the rear-I/O cover.
3. Replace the solid-state drive.
4. Replace the wireless card.
5. Replace the
base cover.
27
To Next Page
Loading...
