Removing the battery
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the
wireless card.
3. Remove the solid-state drive.
4. Remove the rear-I/O cover.
5. Remove the computer base.
Procedure
1. Peel off the keyboard connector from the battery.
2. Lift the battery off the palm-rest assembly.
30
To Next Page
Loading...
