Dell Alienware 13 R3 - Chapter 35: Removing the Palm Rest; Prerequisites; Procedure

Removing the palm rest
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the base cover.
2. Remove the
wireless card.
3. Remove the solid-state drive.
4. Remove the memory modules.
5. Remove the rear-I/O cover.
6. Remove the computer base.
7. Remove the coin-cell battery.
8. Remove the
heat-sink assembly.
9. Remove the battery.
10.Remove the system board.
11. Remove the speakers.
12. Remove the touch pad.
13. Remove the
display assembly.
14. Remove the keyboard.
15.Remove the power-adapter port.
16.Remove the power-button board .
Procedure
After performing all the prerequisites, we are left with the palm rest.
51