Dell Alienware 13 R3 - Chapter 36: Replacing the Palm Rest; Procedure; Post-Requisites

Replacing the palm rest
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps
in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
Place the palm rest on a flat surface.
Post-requisites
1. Replace the
power-button board.
2. Replace the power-adapter port.
3. Replace the keyboard.
4. Replace the display assembly.
5. Replace the touch pad.
6. Replace the
speakers.
7. Replace the system board.
8. Replace the battery.
9. Replace the heat-sink assembly.
10.Replace the
coin-cell battery.
11. Replace the computer base.
12. Replace the rear-I/O cover.
13. Replace the memory modules.
14. Replace the solid-state drive.
15.Replace the
wireless card.
16.Replace the base cover.
53