Table 4. Advanced tab (continued)
Advanced
SATA Operation Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Adapter Warnings Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported by
your computer.
Default: Enabled
Function Key Behavior Allows you to set function key or multimedia key as the default
function key behavior.
Default: Function key
Express Charge Allows you to charge your computer battery using Standard
Charge or Express Charge mode.
Default: Express Charge
Touchpad Backlight Allows you to configure the touchpad backlight option.
Battery Health Displays the battery health.
Intel Software Guard Extensions Allows you to enable of disable the Intel Software Guard
Extensions
Default: Disabled
BIOS Recovery Enable the user to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive
Default: Enabled
Performance Options
SupportAssist System Resolution
Auto OS Recovery Threshold Control the automatic boot flow for SupportAssist System
Resolution Console and for Dell OS Recovery tool.
Table 5. Security tab
Security
Unlock Setup Status Displays if the setup status is unlocked.
Admin Password Status Displays if the administrator password is clear or set.
Default: Not set
System password Status Displays if the system password is clear or set.
Default: Not set
HDD password Status Displays if the HDD password is clear or set.
Default: Not set
Admin Password Allows you to set the administrator password. The
administrator password controls access to the system setup
utility.
System Password Allows you to set the system password. The system password
controls access to the computer at boot.
HDD password Allows you to set, change or delete the hard-disk drive
password.
Password Change Allows you to permit or deny system password or HDD
password changes.
73
To Next Page
Loading...
Need help?
General