Table 20. System setup options—Advanced menu(continued)
Advanced
Default: All
Multiple Atom cores
Multiple Atom cores Allows you to configure Multiple Atom cores.
Default: All
Trusted Execution
Trusted Execution Allows you to enable or disable Trusted Execution.
Default: Disabled
Integrated NIC
Integrated NIC Allows you to enable or disable the integrated NIC.
Default: Enabled
SATA/NVME Operation
SATA/NVME Operation mode Sets the operating mode of the integrated storage device
controller.
Default: RAID on
Enable Audio Allows you to enable or disable audio.
Microphone Allows you to enable or disable microphone.
PCIe Resizable Base Address Register (BAR)
PCIe Resizable Base Address Register (BAR) Allows you to enable or disable the Resizable Base Address
Register (BAR) feature.
Default: Disabled
IPv4 HTTP Support
IPv4 HTTP Support Allows you to enable or disable IPv4 HTTP Support.
Default: Disabled
IPv6 HTTP Support
IPv6 HTTP Support Allows you to enable or disable IPv6 HTTP Support.
Default: Disabled
USB Configuration
Front USB Ports Allows you to enable or disable the Front USB ports.
Default: Enabled
Rear USB Ports Allows you to enable or disable the Rear USB ports.
Default: Enabled
Power Options
AC Recovery Sets what action the computer takes when power is restored.
Default: Power Off
Deep Sleep Control Allows you to define the controls when Deep Sleep is enabled.
Default: Enabled in S4 and S5
USB PowerShare in S4/S5 State Allows you to charge external devices.
Default: Disabled
102