Table 20. System setup options—Advanced menu(continued)
Advanced
USB PowerShare in Sleep State Allows you to enable front the USB devices to wake the system
from sleep state.
Default: Normal
Auto Power On Allows you to enable or disable Auto Power On.
Default: Disabled
Auto Power On Mode Allows you to set the computer to turn on automatically every
day or on a preselected date. This option can be configured
only if the Auto Power On mode is set to Enabled Everyday or
Selected Day.
Default: Selected Day
Auto Power On Date Allows you to set the date on which the computer must turn
on automatically. This option can be configured only if the Auto
Power On mode is set to Enabled 1 to 31.
Default: 15
Auto Power On Time Allows you to set the time at which the computer must turn on
automatically. This option can be configured only if the Auto
Power On mode is set to Enabled hh:mm:ss.
Default: 12:30:30
Numlock Key Allows you to set the status of the Num Lock key during boot to
On or Off.
Default: Enabled
Performance Options
Overclocking Feature Allows you to enable or disable the Overclocking Feature.
Default: Disabled
XMP Memory Allows you to configure the XMP Memory.
Default: Disabled
Maintenance
Data Wipe on next boot When enabled, the BIOS will schedule a data wipe cycle for all
storage devices that are connected to the system board on the
next reboot.
Default: Disabled
BIOS Recovery from Hard Drive Enables the computer to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive or
an external USB key.
NOTE: BIOS Recovery from Hard Drive is not available for
Self-encrypting drives (SED).
Default: Enabled
BIOS Auto-Recovery When enabled, the autorecovery will be performed if BIOS
image integrity check fails and there is a a recovery image on
the hard drive.
NOTE: BIOS Auto-Recovery is not possible from other
media.
Default: Enabled
SupportAssist System Resolution Controls the automatic boot flow for SupportAssist System
Resolution Console and for Dell operating system Recovery tool.
103
To Next Page
Loading...
