Table 21. System setup options—Security menu(continued)
Security
Secure Boot Enables secure boot using only validated boot software.
Default: Disabled
Secure Boot Mode Modifies the behavior of Secure Boot to allow evaluation
or enforcement of UEFI driver signatures. Deployed Mode
should be selected for normal operation of Secure Boot.
Default: Deployed Mode
Expert Key Management
Custom Mode Allows you to enable or disable Custom Mode. When
enabled, it allows the PK, KEK, db, and dbx security key
databases to be modified.
Default: Disabled
Enable Microsoft UEFI CA Allows you to enable or disable Microsoft UEFI CA.
Default: Enabled
PK
KEK
db
dbx
Reset all Keys
Delete all Keys
Allows for selection of key database.
● Delete All Keys will delete the selected key.
● Reset All Keys will reset all four keys to their default
settings.
Table 22. System setup options—Boot menu
Boot
Boot List Option Displays the available boot devices.
Default: UEFI
File Browser Add Boot Option Allows you to set the boot path in the boot option list.
File Browser Del Boot Option Allows you to delete the boot path in the boot option list.
Boot Option Priorities Displays the available boot devices.
Boot Option #1 Displays the first boot device.
Default: Windows Boot Manager.
Boot Option #2
Displays the second boot device.
Default: Onboard NIC (IPV4 PXE)
Boot Option #3
Displays the third boot device.
Default: Onboard NIC (IPV6 PXE)
Table 23. System setup options—Exit menu
Save & Exit
Save Changes and Reset Allows you to exit system setup and save your changes.
Discard Changes and Reset Allows you to exit system setup and load previous values for
all system setup options.
Restore Defaults Allows you to load default values for all system setup
options.
105
To Next Page
Loading...
