Removing the rear cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the right-side cover.
2 Remove the power-supply unit.
3 Remove the top cover.
4 Remove the left-side cover.
5 Remove the bottom cover.
Procedure
1 Remove the two screws (M3x5) that secures the top bracket to the chassis.
113
To Next Page
Loading...
Need help?
General
