Removing the fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
Remove the right-side cover.
Procedure
NOTE: Note the orientation of the fan while removing the so that you can
replace it correctly.
NOTE: Applicable only for computers shipped with liquid cooling assembly.
1 Lay the computer on the left side and remove the system-fan cable from the
system board.
65
To Next Page
Loading...
