Replacing the memory module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the notch on the memory module with the tab on the memory-module slot
and insert the memory module into the memory-module slot.
2 Press the memory module down until it clicks into place.
3 Place the computer in an upright position.
Post-requisites
Replace the right-side cover.
37
To Next Page
Loading...
Need help?
General
