Replacing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Connect the antenna cables to the wireless card.
2 Place the wireless-card bracket over the wireless card.
3 Align the notch on the wireless card with the tab on the wireless-card slot and
slide the wireless card at an angle into the wireless-card slot.
4 Replace the screw (M2x3.5) that secures the wireless card to the system board.
5 Place the computer in an upright position.
54
To Next Page
Loading...
