Removing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the right-side cover.
2 Remove the front cover.
3 Remove the slim optical drive
4 Remove the top cover.
Procedure
1 Lay the computer on the left side and disconnect the power-button cable from
the system board.
99
To Next Page
Loading...
