Removing the graphics card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
Remove the right-side cover.
Procedure
1 Press the tab and disconnect the graphics-card cable from the graphics card.
2 Lay the computer on the left side and remove the two screws (6-32UNCx3.6)
that secures the graphics-card bracket to the chassis.
68
To Next Page
Loading...
Need help?
General
