Dell D27M - Replacing the rear cover

Replacing the rear cover
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Procedure
1 Align the slots on the rear cover with the tabs on the chassis and snap the cover
in place.
2 Align the screw holes on the top bracket with the screw holes on the chassis.
3 Replace the two screw (M3x5) that secures the top bracket to the chassis.
4 Place the computer in an upright position.
Post-requisites
1 Replace the bottom cover.
2 Replace the left-side cover.
3 Replace the top cover.
4 Replace the power-supply unit.
5 Replace the right-side cover.
116