Figure 54. Removing the system board
Next steps
Install the system board
Installing the system board
Prerequisites
Follow the safety guidelines listed in Safety instructions.
CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
CAUTION: Take care not to damage the system identification button while placing the system board into the
system.
Steps
1. Unpack the new system board assembly.
CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
2. Incline the system board toward the front of the system by holding the system board holder and I/O connector cover.
Installing and removing system components
61
To Next Page
Loading...
