Figure 114. Removing the 1.8 Inch (x18) SAS/SATA backplane
1. release pin 2. left ear control panel cable
3. SAS A2 cable 4. backplane signal cable
5. control panel cable 6. backplane power cable
7. USB cable 8. mini SAS connector (2)
9. SAS cable (2) 10. right ear control panel flex cable
11. hard drive backplane assembly 12. hard drive backplane expander
13. control panel connector 14. backplane power connector
15. SAS A2 connector 16. hard drive backplane connector (18)
Installing and removing system components 179
To Next Page
Loading...
