Dell EMC VxFlex Ready Node - Loading a Configuration File Using Drv_Cfg

Description/Notes
This utility retrieves information about all known MDM objects in kernel mode. This
utility is typically used to determine to which MDM an SDC is connected.
Location of drv_cfg command:
l
Linux: /opt/emc/scaleio/sdc/bin/drv_cfg
l
Windows: C:\Program Files\emc\scaleio\sdc\bin\drv_cfg
l
ESXi: Refer to "Update the SDC parameters in VMware based HCI or Compute
node".
Example
/opt/emc/scaleio/sdc/bin/drv_cfg --query_mdms
Loading a configuration file using drv_cfg
Command
drv_cfg --load_cfg_file
Note:
This is not a CLI command, but rather an executable that is run on the SDC server.
This command can not be used on ESX servers. Instead, follow the steps
described in “Modifying configuration parameters on ESX servers”.
Syntax
/opt/emc/scaleio/sdc/bin/drv_cfg
--load_cfg_file <FILE_NAME>
Description/Notes
This utility reads a configuration file containing MDM IP addresses, and calls the
kernel to connect to them.
Location of drv_cfg command:
l
Linux: /opt/emc/scaleio/sdc/bin/drv_cfg
l
Windows: C:\Program Files\emc\scaleio\sdc\bin\drv_cfg
l
ESXi: Refer to "Update the SDC parameters in VMware based HCI or Compute
node".
Example
/opt/emc/scaleio/sdc/bin/drv_cfg
--load_cfg_file /etc/emc/scaleio/drv_cfg.txt
Managing System Objects
148 Dell EMC VxFlex Ready Node AMS User Guide