Dell EMC VxFlex Ready Node - Open the KVM Console - R630;R730 Xd Servers

Procedure
1. From a browser, go to http:// <iDRAC_IP_address> .
2. In the DELL Console Login window, enter the user name and password, and
then click Login.
The Dashboard displays the high-level status of all hardware devices in the
System Health pane.
In an ideal scenario, all hardware sensors are green.
3. Navigate to Maintenance > System event log.
The System Event Log pane is displayed with color-coded severity levels.
4. Ensure that any power supply- and fan-related events in the event log are non-
repetitive. Repetitive events may be due to the intermittent nature of faults,
such as poor physical connections.
For repetitive events, Dell EMC recommends that you remove the relevant
hardware module and replace it in its socket.
5. In the navigation pane, select Storage > Overview > Controller.
A table displays the controller-related information, with the controller type in
the Name column. For example:
PERC H740P Mini (Embedded)
6. In the navigation pane, select Storage > Physical Disks.
A table displays information regarding the physical disks, and an option to
Blink/Unblink the selected disk.
7. Verify that no disk is in failed state.
If any of the disks is failed, refer to the relevant Disk Replace FRU.
8. In the navigation pane, select System.
9. In the Inventory pane, verify that the server drivers and firmware in the
Firmware Inventory list match the required versions, as published in the Driver
and Firmware Matrix.
If the driver and firmware versions do not match the matrix, the AMS
deployment will align the drivers and firmware with the latest supported
versions.
Open the KVM console - R630/R730xd servers
Open the KVM console on a VxFlex Ready Node server.
Before you begin
Ensure that:
l
The system environment meets the prerequisites for using the KVM console.
l
You know the IP address of the iDRAC port.
l
You know the username and password for accessing the iDRAC (default
username/password are root/password).
Procedure
1. From your Internet browser, go to https://
<iDRAC_IP_address> .
Server Factory Reset and Power Operations
330 Dell EMC VxFlex Ready Node AMS User Guide