Dell EMC VxFlex Ready Node - License and Installation

Snapshot volumes could not be found, by ID
Parameter Description
Name SNAPSHOT_VOLUMES_FAILED_BY_ID
Message Could not snapshot volumes, because a
volume ID was not found. ID:
"MOS_OBJID__FORMAT"."
Severity Error
Description This message is posted if a snapshot_volume
command contains an invalid volume ID (out
of many). The CLI will only get an error code,
but in the event, you can see which volume ID
is invalid.
Action Verify the parameters entered for the
snapshot_volume command
Snapshot volumes could not be found, by name
Parameter
Description
Name SNAPSHOT_VOLUMES_FAILED_BY_NAME
Message Could not snapshot volumes, because a
volume was not found: Name: %s.
Severity Error
Description This message is posted if a snapshot_volume
command contains an invalid volume name
(out of many). The CLI will only get an error
code, but in the event, you can see which
volume name is invalid.
Action Verify the parameters entered for the
snapshot_volume command
License and installation
License Expiration Warning
Parameter
Description
Name LICENSE_EXPIRATION_WARNING
Message License will expire in X days
Severity Warning
Description System license will expire in 30 days or less
System events
282 Dell EMC VxFlex Ready Node AMS User Guide