Dell EMC VxFlex Ready Node - Configuration Settings

l
<dracIP> is the iDRAC IP address
l
<password> is the password for the server
l
<filename.exe> is the name of the Dell Windows update packages
Note: The default password is calvin for 13G nodes and Scaleio123 for 14G nodes.
Configuration settings
The Hardware ISO runs a script that automatically configures the BIOS and iDRAC
settings listed in the table below. Some settings are dependent on the server model.
Table 36 Hardware ISO configuration settings
Description Setting Value
Server BIOS Boot Sequence BIOS.BiosBootSettings.BootS
eq
HardDisk.List.1-1
Hard Disk Boot Order BIOS.BiosBootSettings.HddS
eq
Disk.SATAEmbedded.J-1,RAI
D.Integrated.1-1
or
Disk.SATAEmbedded.D-1,RAI
D.Integrated.1-1
Server Boot Mode BIOS.BiosBootSettings.Boot
Mode
Bios
SRIOV Global Enablement BIOS.IntegratedDevices.Sriov
GlobalEnable
Enabled
Memory Performance Tuning BIOS.MemSettings.SnoopMo
de
EarlySnoop
System Change Tracking BIOS.MiscSettings.InSystem
Characterization
Disabled
CPU Virtualization Features BIOS.ProcSettings.ProcVirtu
alization
Enabled
CPU Cores BIOS.ProcSettings.ProcCores All
CPU X2APIC Mode BIOS.ProcSettings.ProcX2Api
c
Enabled
CPU Turbo Engagement BIOS.ProcSettings.Controlled
Turbo
Disabled
System Power Profile BIOS.SysProfileSettings.SysP
rofile
PerfOptimized
OS to iDRAC Pass-through
Mode
iDRAC.OS-BMC.PTMode usb-p2p
OS to iDRAC Enablement iDRAC.OS-BMC.AdminState Enabled
iDRAC DHCP Enablement iDRAC.IPv4.DHCPEnable Disabled
iDRAC Default Credentials iDRAC.Tuning.DefaultCredent
ialWarning
Disabled
DTK - Hardware Update Bootable ISO
342 Dell EMC VxFlex Ready Node AMS User Guide