Figure 22 Backend filter
Command menu
The Command menu button displays a list of commands which you can perform on
rows selected in the table. The contents of the Command menu differ, depending on
the object selected in the table. Many of the commands can also be accessed from the
context-sensitive menu when table rows are right-clicked.
Table
The table displays object statuses, and allows configuration of some objects. The
contents of a Property Sheet for a specific object are determined by the row selected
in the table. The color codes described in "Color codes" in the
Monitor Guide
also apply
to the items displayed in the table.
The information displayed in the table is controlled by the filter and the table view
options. Selected objects (rows in the table) can be created, configured and removed
using context-sensitive menu options, or commands from the Command menu. The
columns in the table can be resized, by dragging the borders in the heading row of the
table. The scrollbar at the bottom of the table lets you scroll through the columns in
the table. The following table describes the available table views:
Note:
Clock icons
in the cells indicate stale/aging data.
Table 30 Table view options
Name of view Contents of view Suggested use, comments
Overview Total Capacity, Capacity In-Use, I/O Bandwidth,
IOPS, Rebuild, Rebalance, Migration, Alerts
Provides a general overview the capacity and
health of system objects.
If you find that there are active alerts, you can
switch to State Summary table view, or the
Monitor > Alerts view to see more details about
the alerts.
VxFlex OS GUI Features
100 Dell EMC VxFlex Ready Node AMS User Guide
To Next Page
Loading...
