Dell EMC VxFlex Ready Node - Page 174

Syntax
scli --logout
Actual command syntax is operating-system dependent. For more information, see
“CLI basics”.
Description/Notes
This command logs the current user out of the system.
Example
scli --logout
Setting the User Authentication Method
Command
set_user_authentication_method
Syntax
scli --set_user_authentication_method (--ldap_authentication | --
native_authentication | --native_and_ldap_authentication) [--
i_am_sure]
Actual command syntax is operating-system dependent. For more information, see
“CLI basics”.
Description/Notes
This command sets user authentication method for the system.
Note:
Use this command with caution, because it is complex to roll-back this operation.
Parameters
Parameter
Description
--ldap_authentication LDAP based authentication method, where
users are managed in LDAP compliant server.
In order to switch to this authentication
method, LDAP service parameters should be
configured.
--native_authentication Native authentication method, where users
are managed locally in the system
--native_and_ldap_authentication A hybrid authentication method. Both LDAP
and Native users may log into the system
after it is set.
Security Management
174 Dell EMC VxFlex Ready Node AMS User Guide