Dell EMC VxFlex Ready Node - Page 279

Actual command syntax is operating-system dependent. For more information, see
“CLI basics”.
Description/Notes
Starts posting events to one or more remote syslog servers.
Parameters
Parameter Description
--remote_syslog_server_ip <IP> A comma-separated list of syslog server IP
addresses (maximum of two servers)
--remote_syslog_server_port <PORT> The syslog server port (default 1468)
--syslog_facility <FACILITY> Controls the facility field of the event (legal
values 0—23; default 16)
--attach_event_code Add the posted event code to the event
message (disabled, by default)
Example
scli --start_remote_syslog --remote_syslog_server_ip 192.168.1.10 --
remote_syslog_server_port 1500
Stop posting events to remote syslog servers
Syntax
scli --stop_remote_syslog --remote_syslog_server_ip
<IP>
Actual command syntax is operating-system dependent. For more information, see
“CLI basics”.
Description/Notes
Stops posting events to remote syslog servers.
Parameters
Parameter
Description
--remote_syslog_server_ip <IP> A comma-separated list of syslog servers IP
addresses
Example
scli --stop_remote_syslog --remote_syslog_server_ip
192.168.1.10,192.168.1.20
Configure the syslog events facility field
Command:
set_syslog_facility
System events
Dell EMC VxFlex Ready Node AMS User Guide 279