Dell EMC VxFlex Ready Node - Page 336

The LED stops blinking.
l
Display the front panel status LEDs:
a. On the dashboard, select Configuration > System settings > Hardware
settings.
b. From the Front Panel Configuration menu, select Monitor Server LED
- From Dashboard > System > Overview.
c. Click Front Panel.
The front panel status LEDs are displayed.
2. To retrieve the chassis serial number, in the dashboard click System > Details.
The service tag is displayed with the corresponding serial number.
3. To power the server off or on, use of the following methods:
l
From the dashboard, click Graceful Shutdown > Power Off, and then click
OK.
l
From the dashboard, select Power Management > Power Control > Power
Off System / Power On System.
Server Factory Reset and Power Operations
336 Dell EMC VxFlex Ready Node AMS User Guide