Deploying FCoE (FIP Snooping) on Dell Force 10 MXL
27
“show fip-snooping sessions”
Figure 23.
NOTE: The above figure “show fip-snooping sessions” has some display overlap which will be
somewhat typical based on screen size of the terminal being used.
Using the Force10 MXL, fip-snooping statistics can be validated using:
show fip-snooping statistics. This command will display the various counters applicable to the fip-
snooping feature
“show fip-snooping statistics” Figure 24.
NOTE: the above figure “show fip-snooping statistics” is continued on next page.
MXL-B1-Rack3015# show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN FCoE
MAC FC-ID Port WWPN Port WWNN
--------- ---------- ------- -------- ----
-------- ----- --------- ---------
5c:f9:12:34:56:78 Te 0/3 54:7f:ee:56:55:49 Te 0/52 1000
0e:fc:00:55:00:04 55:00:04 20:01:5c:f9:dd:16:ef:26
20:00:5c:f9:dd:16:ef:26
MXL-B1-Rack3015# show fip-snooping statistics
Vlan 20
-------------
Number of Vlan Requests :23
Number of Vlan Notifications :17
Number of Multicast Discovery Solicits :0
Number of Unicast Discovery Solicits :0
Number of FLOGI :0
Number of FDISC :0
Number of FLOGO :0
Number of Enode Keep Alive :0
Number of VN Port Keep Alive :0
Number of Multicast Discovery Advertisement :0
Number of Unicast Discovery Advertisement :0
Number of FLOGI Accepts :0
Number of FLOGI Rejects :0
Number of FDISC Accepts :0
Number of FDISC Rejects :0
Number of FLOGO Accepts :0
Number of FLOGO Rejects :0
Number of CVL :0
Number of FCF Discovery Timeouts :0
Number of VN Port Session Timeouts :0
Number of Session failures due to Hardware Config :0
To Next Page
Loading...
Need help?
General
