Dell Force10 MXL User Manual

Deploying FCoE (FIP Snooping) on Dell Force 10 MXL
42
Command-Line Interface Method
Multiple port uplink (LAG) MXL configuration (can be copied and pasted) Figure 37.
configure
default vlan-id 20
interface TenGigabitEthernet 0/1
no ip address
mtu 2500
portmode hybrid
switchport
protocol lldp
dcbx port-role auto-downstream
spanning-tree pvst edge-port
no shutdown
exit
interface TenGigabitEthernet 0/2
no ip address
mtu 2500
portmode hybrid
switchport
protocol lldp
dcbx port-role auto-downstream
spanning-tree pvst edge-port
no shutdown
exit
interface TenGigabitEthernet 0/51
no ip address
mtu 2500
port-channel-protocol LACP
port-channel 5 mode active
protocol lldp
no advertise dcbx-tlv ets-reco
dcbx port-role auto-upstream
no shutdown
exit
interface TenGigabitEthernet 0/52
no ip address
mtu 2500
port-channel-protocol LACP
port-channel 5 mode active
protocol lldp
no advertise dcbx-tlv ets-reco
dcbx port-role auto-upstream
no shutdown
exit

Dell Force10 MXL Specifications

General

Manageable	Yes
Product Series	Force10 MXL
Operating Temperature	0°C to 40°C (32°F to 104°F)
Layer Support	Layer 2, Layer 3
QoS Support	Yes
Power Supply	Dual, hot-swappable
Product Type	Switch
Jumbo Frame Support	Up to 9216 bytes
Management	CLI, SNMP, Web-based GUI
VLAN Support	Yes