Dell Force10 MXL User Manual

Deploying FCoE (FIP Snooping) on Dell Force 10 MXL
70
Appendix B – Full CLI examples
Force10 MXL CLI example
MXL-B1-Rack3015#show run
Current Configuration ...
! Version E8-3-16-123
!
boot system stack-unit 0 primary system: B:
boot system stack-unit 0 default system: B:
boot system gateway 172.25.151.254
!
redundancy auto-synchronize full
!
hostname MXL-B1-Rack3015
!
username root password 7 d7acc8a1dcd4f698 privilege 15
username admin password 7 fea175715f6aa1df privilege 15
!
default vlan-id 10
!
stack-unit 0 provision MXL-10/40GbE
!
stack-unit 0 port 41 portmode quad
!
stack-unit 0 port 45 portmode quad
!
interface TenGigabitEthernet 0/1
no ip address
mtu 2500
portmode hybrid
switchport
!
protocol lldp
dcbx port-role auto-downstream
no shutdown
!
interface TenGigabitEthernet 0/2
no ip address
mtu 2500
portmode hybrid
switchport
!
protocol lldp
dcbx port-role auto-downstream
no shutdown
!
interface TenGigabitEthernet 0/3
no ip address
shutdown
!
interface TenGigabitEthernet 0/4
no ip address
shutdown
!
interface TenGigabitEthernet 0/5

Dell Force10 MXL Specifications

General

Manageable	Yes
Product Series	Force10 MXL
Operating Temperature	0°C to 40°C (32°F to 104°F)
Layer Support	Layer 2, Layer 3
QoS Support	Yes
Power Supply	Dual, hot-swappable
Product Type	Switch
Jumbo Frame Support	Up to 9216 bytes
Management	CLI, SNMP, Web-based GUI
VLAN Support	Yes