Dell Force10 MXL User Manual

Deploying FCoE (FIP Snooping) on Dell Force 10 MXL
75
---------------- additional MXL config example with vPC on Cisco Nexus and
separate LAG/PortChannel configured for FCoE
MXL-1
SHOW RUNNing-config
Current Configuration ...
! Version E8-3-16-166
! Last configuration change at Thu May 5 14:01:10 2011 by default
! Startup-config last updated at Thu May 5 14:07:09 2011 by default
!
boot system stack-unit 0 primary system: A:
!
redundancy auto-synchronize full
!
hostname MXL_B1
!
enable password 7 b125455cf679b2089a964cf3e8637550fe9d00118c7d1ad8
!
username root password 7 d7acc8a1dcd4f698 privilege 15
username admin password 7 fea175715f6aa1df privilege 15
!
stack-unit 0 provision MXL-10/40GbE
!
interface TenGigabitEthernet 0/1
no ip address
portmode hybrid
switchport
shutdown
interface TenGigabitEthernet 0/2
no ip address
portmode hybrid
switchport
shutdown
!
interface TenGigabitEthernet 0/3
no ip address
portmode hybrid
switchport
shutdown
!
interface TenGigabitEthernet 0/4
no ip address
portmode hybrid
switchport
shutdown
!
interface TenGigabitEthernet 0/5
no ip address
portmode hybrid
switchport

Dell Force10 MXL Specifications

General

Manageable	Yes
Product Series	Force10 MXL
Operating Temperature	0°C to 40°C (32°F to 104°F)
Layer Support	Layer 2, Layer 3
QoS Support	Yes
Power Supply	Dual, hot-swappable
Product Type	Switch
Jumbo Frame Support	Up to 9216 bytes
Management	CLI, SNMP, Web-based GUI
VLAN Support	Yes