Identifier GUID-166DA787-661F-4E60-8975-5E84EDB0868D
Status Released
Removing the display cable
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Identifier GUID-CA56EBCC-FF8B-4A2C-9407-6D2D8B9DB988
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Remove the wireless card.
5 Follow the procedure from step 1 to step 17 in Removing the computer base.
6 Remove the display assembly.
7 Remove the display bezel.
8 Remove the display panel.
Identifier GUID-CAEDC22D-C836-495D-BDFB-5D1C8ADB3E4E
Status Released
Procedure
1 Note the antenna-cable routing and remove the display cable from the routing guides on the display back-cover and antenna assembly.
2 Lift the display cable o the display back-cover and antenna assembly.
49
114 Removing the display cable
To Next Page
Loading...
