Identifier GUID-1FB16E7C-AF0C-4FA0-8736-EAD91D8969A8
Status Released
Removing the camera
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Identifier GUID-64703457-40AB-43B9-9678-83366AABEE76
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Remove the wireless card.
5 Follow the procedure from step 1 to step 17 in Removing the computer base.
6 Remove the display assembly.
7 Remove the display bezel.
8 Remove the display panel.
Identifier GUID-C1B5E36C-E043-4C2A-BF1A-EF6AADF3E09E
Status Released
Procedure
1 Using a plastic scribe, gently pry the camera from the display back-cover and antenna assembly.
2 Open the latch and disconnect the camera cable from the camera.
3 Peel o the camera from the display back-cover and antenna assembly.
51
118 Removing the camera
To Next Page
Loading...
