Identifier GUID-690FF12D-2581-4326-8270-C4B813388FD3
Status Released
Replacing the camera
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Identifier GUID-EFC9B778-1B93-43E1-B91A-3FB32936E076
Status Released
Procedure
1 Align the camera with the alignment posts on the display back-cover and antenna assembly and adhere the camera in place.
2 Connect the camera cable to the camera and close the latch to secure the cable.
52
120 Replacing the camera
To Next Page
Loading...
