Identifier GUID-2EF50600-2483-40F4-A773-07DC95179CB6
Status Released
Replacing the display back-cover and antenna
assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Identifier GUID-7501A384-49FF-4EF7-B7B4-58C18047DBCC
Status Released
Procedure
1 Route the camera cable through the routing guides on the display back-cover and antenna assembly.
2 Adhere the tape that secures the camera cable to the display back-cover and antenna assembly.
54
124 Replacing the display back-cover and antenna assembly
To Next Page
Loading...
