• When you load Legal-size paper, extend the tray while pushing the lever located on the front
part of the tray.
3 Before loading the print media, flex and fan the sheets. Straighten the edges of the
stack on a level surface.
4 Load the print media into the tray with the recommended print side facing up.
• Do not exceed the maximum fill line in the tray. Overfilling the tray may cause paper jams.
• When loading coated paper, load one sheet at a time.
• When loading letterhead, pre-printed, or pre-punched paper, see "Loading Letterhead,
Pre-Printed, and Pre-Punched Paper."
To Next Page
Loading...
