256
|Faxing
If the desired speed dial number is not displayed, tap or to scroll through the
screen.
To jump to a specific speed dial number, enter the desired number and then # using
the number pad.
If a speed dial number is already set, the screen shows the name and the number of
entries.
4 Tap the Enter Name text box.
5 Enter the name, and then tap OK.
6 Tap the Enter Number text box.
7 Enter the fax number using the number pad, and then tap OK.
To insert a pause between numbers, press the (Redial/Pause) button.
"-" appears on the touch panel.
8 Tap OK.
9 Repeat steps 3 to 8 as needed.
Editing Speed Dial
You can edit or delete a speed dial number.
1 Press the (Information) button.
2 Tap the Tools tab Admin Settings Phone Book Individuals.
If Panel Lock Control is set to Enable, enter the password. See "Panel Lock."
3 Select the desired speed dial number.
If the desired speed dial number is not displayed, tap or to scroll through the
screen.
4 Perform the following:
• To edit a speed dial number:
a Tap Edit the Name or Fax Number text box.
b Enter a new name or a fax number, and then tap OK.
• To delete a speed dial number:
Tap Remove Delete.
5 Repeat steps 3 to 4 as needed.
Sending a Fax Using Speed Dial
1 Load the document(s).
See "Loading Documents."
2 Press the (Home) button.
3 Tap Fax Speed Dial.
To Next Page
Loading...
