Dell H625cdw - Page 348

348 | Maintaining Your Printer
3 Wipe the surface of the document glass, DADF glass, white strip, and white
document cover until it is clean, and then wipe with a dry cloth or paper towel until
it is completely dry.
NOTE:
• Handle the white strip with care.
4 Pull the tab to open the DADF chute cover and hold it open.
5 Wipe the surface of the duplex sensor glass and white strip until it is clean, and then
wipe with a dry cloth or paper towel until it is completely dry.
1White Strip
2White Document Cover
3Document Glass
4DADF Glass
4
3
1
2
1
2