3 Route and connect the following cables though the respective routing guides
and connectors on the system board:.
– Fan-power cable (FAN_SYS)
– Display cable (MB-DISPC)
– Power-button board cable (0SDC1)
– Power cable (MB-DCPWR)
– Hard-drive data cable (SATA0)
– Hard-drive power cable (SATA_PWR1)
– Rear I/O cable (RUSBC1)
– USB Type-C cable (MB-TYPEC1)
– Rear I/O-board cable (LAUOC1)
– Rear I/O-board power cable (RPWRC1)
– Touch-screen cable (TOUCH1)
– Speaker cable (SPEAKER)
– Media-card reader cable (SDRDC1)
– Side I/O-board cable (MB-SUSBC)
– Camera cable (WEBCAM)
– Microphones cable (DMIC1)
Identifier GUID-221C1873-0102-4BBD-8D19-1E8C70D471AA
Status Released
Post-requisites
1 Replace the processor.
2 Replace the processor heat-sink.
3 Replace the wireless card.
4 Replace the solid-state drive.
5 Replace the memory modules.
6 Replace the system-board shield.
7 Replace the back cover.
103
To Next Page
Loading...
