Identifier GUID-A35BD2D5-B3B3-4708-AF1C-D61C58B9F952
Status Released
Removing the power-button
board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-77F77B30-2AD8-4B7D-988A-9BC1CDDB98C5
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the stand.
3 Remove the inner frame.
Identifier GUID-B58F7F11-A315-41A0-806D-DD6BA5EA5239
Status Released
Procedure
1 Remove the two screws (M2x3.5) that secure the power-button board shield to
the middle frame.
2 Slide and lift the power-button board o the middle frame.
41
To Next Page
Loading...
