Identifier GUID-CF4B7AEA-F9A9-4432-8BD8-AB77D419F494
Status Released
Removing the chassis fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-80B6901A-84B9-4E89-AECE-A1BD484B2AEF
Status Released
Prerequisites
1 Remove the back cover.
2 Remove the system-board shield.
Identifier GUID-B2DF68B6-7454-4584-9652-6ECD9242030C
Status Released
Procedure
1 Disconnect the fan-power cable (FAN_SYS) from its connector on the system
board.
2 Remove the three screws (M3x5) that secure the chassis fan to the middle
frame.
52
To Next Page
Loading...
