Dell Inspiron 24 5000 - Replacing the I;O Bracket; Post-requisites for I;O Bracket Replacement

Identifier GUID-95E4D169-600E-4E8D-9A1E-709C6727D43A
Status Released
Replacing the I/O bracket
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-18D6BC9D-6CF3-462A-A514-B75386C54A4E
Status Released
Procedure
1 Align the screw holes on the I/O bracket with the screw holes on the middle
frame.
2 Replace the nine screws (M3x5) that secure the I/O bracket to the middle
frame.
Identifier GUID-7E8ED145-5E0A-485E-9E46-CFB1A1437B4E
Status Released
Post-requisites
1 Replace the inner frame.
2 Replace the stand.
3 Replace the back cover.
92