Dell Inspiron 24 5000 - Replacing the Chassis Fan; Post-requisites for Chassis Fan Replacement

Identifier GUID-A5935F79-B1C0-4412-A1FD-03EA0DB0E2A1
Status Released
Replacing the chassis fan
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-600C2E4F-5738-4A4A-A19B-29DF2828654F
Status Released
Procedure
1 Align the screw holes on the chassis fan with the screw holes on the middle
frame.
2 Replace the three screws (M3x5) that secure the chassis fan to the middle
frame.
3 Connect the chassis fan cable to the system board.
Identifier GUID-352452C2-A4B4-43B4-9917-C72AF18BDA02
Status Released
Post-requisites
1 Replace the system-board shield.
2 Replace the back cover.
54