Identifier GUID-5E22F4A0-F01F-4522-8155-BE22A8CA6E5F
Status Released
Replacing the coin-cell battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-D072C769-E940-4199-B5EA-9135A9B32037
Status Released
Procedure
1 With the positive-side facing up, insert the coin-cell battery into the battery
socket on the system board and press down the battery into place.
2 Adhere the coin-cell rubber cap onto the positive-side of the coin cell battery.
Identifier GUID-352452C2-A4B4-43B4-9917-C72AF18BDA02
Status Released
Post-requisites
1 Replace the system-board shield.
2 Replace the back cover.
66
To Next Page
Loading...
